Diamond Painting Guides
A Creovia beginner guide
How to Clean Diamond Painting Storage Containers Before a New Project
Reset your drill containers for a new project with a careful emptying, labeling, and inspection routine.
A good way to clean diamond painting storage containers before a new project is to empty one labeled container at a time, remove loose drills and dust, and check that the container is completely dry before adding a new color. Keep the old project’s labels with its remaining drills until you know what you want to save. The aim is a clean reset without losing the color key.
You do not need to empty the whole case onto your table. A slow, one-container routine gives you a chance to spot a stray drill in a lid or corner before it joins the next project.
Decide what to keep before removing labels
Start with the chart and any leftover drills from the finished project. If you want to keep a color, transfer it to a clearly labeled packet or container first. Copy the project identifier and the color code from its key; include the symbol when that helps you match the packet to the canvas. Close the packet before opening another jar.
If the label is unreadable or the contents include more than one possible color, set that container aside. Similar shades can look nearly identical under indoor light. Avoid guessing which project or code a loose drill belongs to just to finish the reset quickly.
For a full approach to mixed colors, see Mixed Up Diamond Painting Drills? How to Sort Colors Without Guessing. Once you have saved or separated the remaining drills, remove or cover the old label so it cannot be mistaken for a new one.
Empty one container at a time
Place a clean tray or shallow dish on a stable surface. Open one container, tip the remaining drills into the tray, and inspect the bottom. Look around the rim and inside the lid as well: a single piece can hide near the closure and fall back into the container later.
Keep the old color’s label beside the tray while you work. If the container is part of a larger organizer, return it to a separate “ready to inspect” area rather than mixing it with jars that still contain old colors. Finish and close one packet before moving to the next container.
A lid that does not open comfortably should not be forced with a sharp tool. Check the product instructions and take your time; damaged threads or a strained hinge can make a container harder to close securely later.
Remove dust and stray drills
Once the container is empty, use a clean, dry, lint-free cloth or a soft, dry brush to lift away visible dust. Work gently around the opening and closure. Avoid pushing debris deeper into the hinge or leaving loose fibers inside. Tap the container lightly over the tray and check whether anything remains.

If material is stuck or the container needs more than a dry wipe, check its own care instructions before using water or a cleaner. Different storage cases contain different materials, closures, foam inserts, and labels; a method suitable for one part may not be suitable for another. Do not soak the case, foam, or labels on the assumption that all components can be washed.
Inspect the tray between containers too. A piece left in a groove can end up in the next jar. Our guide to cleaning a drill tray between colors covers that separate step.
Check the lid and let every part dry
Look at the inside of the lid and the edge where it meets the container. Clear away any visible loose drill and check that the closure moves normally. Screw lids should meet their threads without being forced; flip tops should close as intended. If a lid is damaged, keep that container out of the active set until you have a suitable replacement.
If any part has become damp, allow it to dry completely before adding drills or placing it back against the foam. Pay attention to edges, closures, and corners, not just the middle of the container. Do not add loose drills to a container that still feels damp.
Keep the case itself on a dry surface while you work. The listing for the Creovia Diamond Painting Storage Organizer Case with Tool Kit recommends keeping containers closed and storing the case in a dry place. Its foam inserts hold the containers; remove loose drills from the slots carefully before returning the jars.
Set up the new project before filling
Put the new canvas key next to the empty containers. Count the colors you want to store and prepare a label for each container before pouring. A label can include the project name, the chart symbol, and the color code, copied from the new kit. Use a format you can read easily once the jars are back in the case.
Transfer one color at a time. Compare the packet with the label and key, pour a manageable amount, close the container, and return it to its slot. Keep any extra drills in their original identified packet if you do not know whether they will fit. Check for leftover pieces in the tray before opening the next color.
The drill organization guide explains how to keep the code-to-symbol match intact during a project. If you share an organizer between projects, include a project identifier on every container and keep each project’s key accessible.
Account for your container style
The Creovia organizer listing includes several options. Its 30-, 60-, and 120-jar styles use round screw-top jars, while the 160-container blue style uses rectangular flip-top containers. The 120- and 160-container cases have two removable layers. The listed contents and case size depend on the selected style.

The cleaning routine is the same in principle—empty, inspect, remove visible debris, and make sure the container is dry—but pay attention to the closure you have. Check around screw threads on jars and the hinge and lid edge on flip-top containers. With a two-layer case, reset one layer at a time so empty containers stay separate from those still holding drills.
When choosing a case, count the colors on the new project’s key rather than assuming that the largest case is necessary. Compare the listed capacities and dimensions on the product page before ordering.
Frequently asked questions
Can I reuse diamond painting jars for a different kit?
Yes. Empty and inspect each jar, remove the old label, and add a clear label matching the new kit’s color key. Keep any old drills you want to save in separately labeled packaging.
Should I wash the containers with water?
Check the care instructions for the particular containers first. Dry cleaning can remove loose dust and drills. Do not assume that a case, foam insert, label, or lid can be soaked; if any part becomes damp, let it dry completely before reuse.
What if I find a drill stuck inside the lid?
Remove it over a clean tray and keep it with the identified old color if you can verify the match. If you cannot identify it, set it aside instead of mixing it into the new project.
Can I reuse labels from the previous project?
Only if they clearly and accurately identify the new project and its color key. Otherwise remove or cover the old label and make a new one before transferring drills.
How do I clean a two-layer organizer without mixing containers?
Work on one layer and one container at a time. Keep containers with old drills separate from those that have been emptied, inspected, and relabeled. Return the completed layer to the case before starting the next one.
Find your next project
Explore diamond painting kits.

Colorful Village Street Diamond Painting Kit
$23.99

Tropical Hibiscus Queen Diamond Painting Kit
$23.99

Santa Hug Reindeer Diamond Painting Kit Christmas
$23.99

Blue Hydrangea Village Diamond Painting Kit
$23.99

Tropical Macaw Hibiscus Diamond Painting Kit
$23.99

Santorini Sunset Village Diamond Painting Kit
$23.99

Pink Dragon Cherry Blossom Pagoda Diamond Painting Kit
$23.99


